- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC’s. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
|Event Buffer||100,000 transactions|
|Qty. 4||26/34bit Wiegand|
|Qty. 4||8bit burst for PIN|
|Qty. 2||1 Aux FORM-C relay output-SPDT [email protected] AC|
|Qty. 2||1 FORM-C relay output-SPDT [email protected] DC or [email protected] AC|
|Indicator||communication, power, status and prox card|
|Operating Temperature||32-113 F (0-45 C)|
|Operating Humidity||20% to 80%|
|Dimensions||10″ x 6″ x 2 1/2″|
|Weight||3 lbs (48 ozs.)|
|Qty. 12||Exit Button 1, 2, 3, 4|
|Qty. 12||Door Sensor 1, 2, 3, 4|
|Qty. 12||Aux 1, 2, 3, 4|
|Power Supply||9.6V-14.4V DC, 1A|
|Length||10″ (160 mm)|
|Width||6.6″ (106 mm)|