Features
- Over-current & over-voltage protection and reversal protection for the power supply and all input/output terminals
- Supports Push protocol
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with 3rd party systems CCTV, Intrusion Detection, Fire Alarm and Elevator Control systems
- Easy-to-use and intuitive programming with ZKBioSecurity Software
- System management by browser from client PC’s. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications
Number of doors controlled – Four
Numbers of readers supported – 12 (8 RS-485 Reader, 4 26-bit wiegand reader)
Types of readers supported – 26-bit Wiegand and RS485
Number of Inputs – 12 (4 for Exit Device, 4 for Door Status, 4 for AUX)
Number of Outputs -8 (4-for C Relay for Lock and 4 for C Relay for Aux Output)
Card holders Capacity -30,000
Fingerprint Capacity -20,000
Log Events Capacity -100,000
Communication -TCP/IP
Package Dimension -350(L)×90(H)×300(W)mm
Package Weight -3.7kg
CPU -32 bit 1.2GHz
RAM -128MB
Flash Memory -256MB
Power -9.6V-14.4V DC
Operating Temp -0-45 °C
Operating Humidity -20% to 80%
Wiring Diagram
